E.S. Fox Limited (ESFL) is hiring a Fleet and Equipment Mechanic for its office in Niagara Falls, Ontario, Canada.
The successful candidate will be responsible for carrying out preventative maintenance, servicing, troubleshooting and repairs on E.S. Fox fleet equipment, including aerial work platforms, forklifts and other construction equipment.
The advertised salary range is $65,000 to $90,000, with final compensation based on qualifications, experience and internal equity.
Job Overview
| Job Detail | Information |
|---|---|
| Employer | E.S. Fox Limited |
| Position | Fleet and Equipment Mechanic |
| Location | Niagara Falls, Ontario, Canada |
| Salary Range | $65,000–$90,000 |
| Experience Required | Minimum 5 years in construction equipment repairs |
| Reports To | Fleet Mechanic Foreman |
| Industry | Construction / Fabrication / Industrial Services |
| Canadian Work Experience | Not required |
| Closing Date | Not stated |
About the Role
The Fleet and Equipment Mechanic reports to the Fleet Mechanic Foreman and is responsible for maintaining, servicing and repairing equipment used within the E.S. Fox fleet.
The role requires strong mechanical and technical knowledge, the ability to accurately diagnose faults, and experience repairing construction equipment.
Key Responsibilities
The successful candidate will be expected to:
- Inspect and maintain aerial work platforms.
- Inspect and maintain forklifts.
- Maintain various types of construction equipment.
- Ensure equipment operates correctly and safely.
- Diagnose equipment malfunctions.
- Identify faults using computerized equipment.
- Determine the extent of required repairs.
- Perform routine preventative maintenance.
- Lubricate equipment where required.
- Clean equipment and components.
- Replace parts when necessary.
- Review work orders.
- Complete work orders accurately.
- Maintain a clean workplace.
- Maintain a safe work environment.
Minimum Experience
Applicants need:
At least 5 years of experience in construction equipment repairs
This is a key requirement for the position.
The advert does, however, specifically state:
Canadian work experience is not required.
This means applicants do not need previous Canadian employment experience, although they still need to meet the technical experience and other requirements of the position.
Licences and Training
The following would be considered assets:
- 421A Heavy Duty Equipment Technician licence, or a similar licence
- Formal training from a recognised equipment manufacturer
Examples provided by the employer include:
- JLG
- JCB
These are listed as assets rather than absolute minimum requirements.
Technical Skills Required
Applicants should have:
- Strong technical knowledge
- Construction equipment repair experience
- Troubleshooting ability
- Diagnostic skills
- Ability to determine required repairs
- Preventative maintenance knowledge
- Microsoft Office 365 proficiency
Other Requirements
Applicants must also meet the following requirements:
- Clean driver’s abstract
- Criminal record check
- Own set of tools
- Working at Heights training
- Elevated work platform training
Personal Attributes
E.S. Fox is looking for candidates who demonstrate:
- Positive attitude
- Initiative
- Willingness to take on new challenges
- Ability to work in a fast-paced environment
- Ability to meet deadlines
- Planning skills
- Organisational skills
Core Competencies
The employer highlights the following competencies:
- Integrity
- Quality
- Continuous Improvement
- Health and Safety Commitment
Salary
The advertised compensation range is:
$65,000 – $90,000
E.S. Fox states that final compensation will depend on factors such as:
- Qualifications
- Experience
- Internal equity
Employee Benefits
E.S. Fox lists a comprehensive benefits package that includes:
- Health benefits
- Dental benefits
- Coverage options for eligible dependants
- Health Care Spending Account
- Healthy Living Wellness Account
- Employee Assistance Program
- Group RSP
- Employer contribution to the Group RSP
- Competitive compensation
- Support for professional development and growth
Health and Safety
E.S. Fox places strong emphasis on:
- Workplace health
- Safety
- Environmental protection
- Safe equipment operation
- Maintaining a clean and safe work environment
Applicants should be comfortable working within a structured safety-focused environment.
About E.S. Fox Limited
E.S. Fox Limited is a Canadian, privately owned multi-trade fabricator and construction company.
The company operates in sectors including:
- Industrial
- Institutional
- Commercial
- Power generation
- Engineering
- Fabrication
- Construction
- Maintenance
The company states that it has operated for more than 90 years and has built a reputation around safety, quality workmanship, operational flexibility and timely project delivery.
Its headquarters are located in Niagara Falls, Ontario, with regional offices in:
- Hamilton
- Toronto
- Port Robinson
- Oshawa
- Kincardine
- Kingston
Canadian Work Experience Is Not Required
One particularly important point in the vacancy is:
Canadian work experience is not required.
Applicants who have relevant construction equipment repair experience from outside Canada may therefore still be considered, provided they meet the position requirements.
The advert does not state that the employer provides:
- Visa sponsorship
- Work permits
- Immigration assistance
- Relocation assistance
Applicants who require work authorisation should therefore verify their eligibility and any immigration requirements separately.
How to Apply
Applications should be submitted through the official E.S. Fox Limited recruitment platform for the:
Latest Vacancies:
- BMO Everyday Banking Associate Jobs 2026 – Remote Work in Canada | English, Mandarin & Cantonese | Salary Up to CAD $50,500 | Apply by 24 October 2026
- CANADA JOBS 2026: NO EXPERIENCE JOBS, WAREHOUSE, MAINTENANCE, TECHNICAL & WINTER OPPORTUNITIES
- Canadian Tire Warehouse Associate – Forest, Ontario | No Experience Required | $17.60/Hour | Apply by 10 December 2026
- Whistler Sliding Centre Control and Timing Operator – Canada | $22–$25/Hour | Staff Housing Available
- Bobsleigh Track Worker – Whistler Sliding Centre, Canada | $21–$25/Hour | Winter 2026 Jobs
Fleet and Equipment Mechanic – Niagara Falls, Ontario
The supplied vacancy information does not include a direct application link.
Applicants should therefore use the official E.S. Fox careers page or the original vacancy listing when submitting their application.
Closing Date
No closing date is stated in the supplied vacancy.
Because this is described as an existing job vacancy, interested applicants should consider applying while the position remains open.
Recruitment and Screening
E.S. Fox states that artificial intelligence tools are not used during applicant screening.
The company notes that AI technology may be used to record interviews, but only with the applicant’s permission.
Applicants should also expect to provide or complete:
- Driver’s abstract
- Criminal record check
- Verification of qualifications or training where applicable
Equal Opportunity and Accessibility
E.S. Fox Limited states that it is an equal opportunity employer committed to an inclusive workplace.
The employer also provides accommodation to applicants with disabilities throughout the recruitment and selection process.
Applicants who require accommodation should advise Human Resources.
CV Tips for Fleet and Equipment Mechanic Applicants
1. Put Your 5+ Years of Experience Near the Top
This position specifically requires at least five years of construction equipment repair experience.
Your CV should clearly show:
- Employer
- Job title
- Employment dates
- Types of equipment serviced
- Repair responsibilities
- Diagnostic responsibilities
2. List the Equipment You Have Worked On
Where accurate, mention experience involving:
- Aerial work platforms
- Forklifts
- Construction equipment
- Heavy equipment
- Hydraulic equipment
- Mechanical systems
- Electrical systems
Do not list equipment you have not actually worked on.
3. Highlight Diagnostic Skills
The role specifically involves troubleshooting and diagnosis.
Useful examples include genuine experience with:
- Computerized diagnostics
- Fault finding
- Electrical troubleshooting
- Mechanical troubleshooting
- Hydraulic troubleshooting
- Identifying component failures
4. Mention Your Licences and Manufacturer Training
If you have any of the following, list them clearly:
- 421A licence
- Heavy Duty Equipment Technician qualification
- JLG training
- JCB training
- Other recognised manufacturer training
5. Include Safety Certifications
Clearly mention any current certification in:
- Working at Heights
- Elevated work platforms
- Occupational health and safety
6. Mention Your Own Tools
Because candidates must have their own set of tools, you can state this on your CV if applicable.
7. International Applicants Should Focus on Relevant Experience
Because Canadian work experience is not required, applicants with overseas experience should clearly explain:
- Types of equipment repaired
- Years of experience
- Industries worked in
- Technical qualifications
- Safety training
- Diagnostic systems used
Example CV Profile
“Experienced fleet and heavy equipment mechanic with more than five years of hands-on experience maintaining, diagnosing and repairing construction equipment. Skilled in preventative maintenance, fault finding, computerized diagnostics and equipment servicing, with strong knowledge of workplace health and safety. Reliable, organised and capable of working independently in fast-paced maintenance environments while maintaining high standards of workmanship.”
Adjust the wording to match your real qualifications and experience.
Possible Fleet and Equipment Mechanic Interview Questions
- Tell us about your experience repairing construction equipment.
- What types of equipment have you worked on?
- How many years of heavy equipment repair experience do you have?
- What experience do you have with aerial work platforms?
- What experience do you have repairing forklifts?
- How do you approach diagnosing an equipment fault?
- What computerized diagnostic tools have you used?
- Tell us about a difficult mechanical fault you diagnosed.
- How do you determine whether a part should be repaired or replaced?
- What is your approach to preventative maintenance?
- How do you ensure maintenance work is properly documented?
- How do you complete work orders accurately?
- What experience do you have with hydraulic systems?
- What experience do you have with electrical systems?
- How do you prioritise multiple repair jobs?
- How do you work safely around heavy equipment?
- What would you do if you discovered an unsafe piece of equipment?
- What does quality workmanship mean to you?
- Tell us about a time you had to meet a difficult repair deadline.
- How do you handle unexpected breakdowns?
- What manufacturer training have you completed?
- Do you hold a 421A licence or similar certification?
- Are your Working at Heights and elevated platform certifications current?
- Do you have your own mechanic tools?
- Why do you want to work for E.S. Fox Limited?
Frequently Asked Questions
Where is the job located?
The role is based in:
Niagara Falls, Ontario, Canada
What is the salary?
The advertised range is:
$65,000–$90,000
How much experience is required?
Applicants need a minimum of:
5 years of construction equipment repair experience
Is Canadian work experience required?
No.
The employer specifically states that:
Canadian work experience is not required.
Is a 421A licence mandatory?
No. A 421A Heavy Duty Equipment Technician licence is listed as an asset.
Do I need my own tools?
Yes. The vacancy states that candidates must have their own set of tools.
Is a criminal record check required?
Yes.
Do I need a clean driving record?
Yes. A clean driver’s abstract is required.
Is Working at Heights training required?
Yes. The vacancy lists Working at Heights and Elevated Work Platform training under other requirements.
Is visa sponsorship offered?
The supplied advertisement does not state that visa sponsorship or immigration support is provided.
What is the closing date?
No specific closing date is stated.
Important Vacancy Summary
Employer: E.S. Fox Limited
Position: Fleet and Equipment Mechanic
Location: Niagara Falls, Ontario, Canada
Salary: $65,000–$90,000
Experience: Minimum 5 years in construction equipment repairs
Canadian Experience: Not required
421A Licence: Asset
Manufacturer Training: Asset
Own Tools: Required
Driver’s Abstract: Clean abstract required
Criminal Record Check: Required
Safety Training: Working at Heights + Elevated Work Platform
Main Duties: Preventative maintenance, servicing, diagnostics and repairs on fleet and construction equipment
Closing Date: Not stated